Finisar FDB-1018 SFP Evaluation Board

SPECIFICATIONS
The FDB-1018 SFP Evaluation Board requires two supply voltages. A module supply voltage of 3.1 to 3.6V should be supplied at connector J2. A 5V ±10% supply, used for the parallel port communication, should be connected to J1. Input signals to the TX+ and TX– connectors should yield a differential swing ranging from 400 mV to 2400 mV, or each have a singleended swing ranging from 200 mV to 1200 mV. Output signals on the RX+ and RX– connectors may range between 185 to 1000 mV, singleended. SFP transceivers have internal AC coupling on all data lines.