JDS Uniphase HA097+20ANC4 HA9 9/125 Optical Attenuator with Pigtails on Back

JDS Uniphase HA097+20ANC4 HA9 9/125 Optical Attenuator with Pigtails on Back

The JDS Uniphase HA097+20ANC4 HA9 Optical Attenuator is a professional HA Series fiber optic attenuator configured for telecom, laboratory, production, and photonics test applications. This product description applies specifically to the HA097+20ANC4 configuration and uses only the configuration details identified by that exact part number.

The HA097+20ANC4 configuration is based on the HA9 optical attenuator model, which is specified for the 1200 nm to 1700 nm wavelength range. This unit is configured with 9/125 fiber, pigtails on the back, no connectors on all ports, no built-in front panel option, and analog 60 dB return loss. These configuration details are important for buyers replacing an existing attenuator or matching a specific optical test setup where model, fiber type, port style, connector configuration, and return loss must be correct.

Features and Benefits of the JDS Uniphase HA097+20ANC4 HA9 Optical Attenuator

The JDS Uniphase HA097+20ANC4 HA9 Optical Attenuator provides practical value for professional users who require a clearly defined optical attenuation configuration for fiber optic measurement and test workflows.

• HA9 optical attenuator model: Uses the HA9 model configuration, identified for 1200 nm to 1700 nm optical attenuation applications.
• 9/125 fiber type: Configured for 9/125 single-mode fiber optic test and measurement environments.
• Pigtails on back: Uses the rear pigtail port configuration for optical test setups that require back-side fiber routing.
• No connectors on all ports: Uses the NC connector configuration, indicating no connector type is installed on all ports.
• No built-in front panel option: This HA097+20ANC4 configuration does not include a front-panel coupler or switch option.
• Analog 60 dB return loss: Uses the analog 60 dB return loss configuration for compatible optical test applications.
• Professional optical attenuation control: Suitable for controlling optical signal levels in telecom, photonics, laboratory, and production test environments.

Advanced Features and Practical Applications

The JDS Uniphase HA097+20ANC4 is intended for optical test environments where controlled attenuation is required across the HA9 wavelength range. Optical attenuators are commonly used to reduce optical signal power to defined test levels during receiver sensitivity testing, optical link simulation, calibration procedures, system verification, and optical component characterization.

The HA9 model supports the 1200 nm to 1700 nm wavelength range, making this configuration suitable for a broad range of fiber optic communications and photonics test applications. The 9/125 fiber configuration supports single-mode optical workflows, while the no-connector configuration allows the pigtails to be terminated or integrated according to the user’s specific optical setup requirements.

The pigtails-on-back configuration is practical for bench-top, rack-based, or integrated optical systems where rear fiber routing is preferred. This can help keep front panels clear, support custom fiber routing, and simplify integration into automated test environments or fixed optical measurement systems.

Because HA Series optical attenuators can be configured in many different ways, this listing should be used only for HA097+20ANC4. Other HA Series model numbers may use different base models, fiber types, port locations, connector types, return loss options, or built-in front panel options. Matching the exact configuration is important for maintaining compatibility with existing test procedures and optical setups.

Typical Applications

The JDS Uniphase HA097+20ANC4 HA9 Optical Attenuator is suitable for professional applications such as:

• Fiber optic attenuation control
• Single-mode optical test setups
• Telecom optical network testing
• Optical receiver sensitivity testing
• Laboratory optical power adjustment
• Photonics component characterization
• Optical link simulation
• Production and engineering test workflows
• Service, repair, and replacement equipment requirements

Product Overview

Brand	JDS Uniphase
Model	HA097+20ANC4
Base Model	HA9
Product Category	Optical Attenuator
Primary Application	Optical attenuation control for fiber optic and telecom test systems
Suitable For	Fiber optic laboratories, telecom test environments, photonics systems, optical component testing, and production test workflows

 

HA097+20ANC4 Configuration Details

Configuration Field	HA097+20ANC4 Setting
Product Family	HA Optical Attenuator
Model Code	09
Model	HA9
Model Description	HA9 optical attenuator, 1200 nm to 1700 nm
Fiber Type Code	7
Fiber Type	9/125
Built-In Option Code	0
Built-In Front Panel Option	None
Return Loss Code	A
Return Loss	Analog 60 dB
Connector Type Code	NC
Connector Type	No connector on all ports
Port Type Code	4
Port Type	Pigtails on back

 

Buyer Considerations

The JDS Uniphase HA097+20ANC4 is a configuration-specific optical attenuator. Buyers should confirm that the HA9 1200 nm to 1700 nm model, 9/125 fiber type, rear pigtail port layout, no-connector configuration, no built-in front panel option, and analog 60 dB return loss selection match the intended optical test setup before purchase.

This description applies only to the HA097+20ANC4 configuration. It should not be used for other HA Series attenuators with different model numbers, fiber types, connector types, port arrangements, return loss options, or built-in options.

Why Buy from AssetRelay?

AssetRelay supplies professional equipment and product solutions for fiber optic, telecom, laboratory, production, inspection, cleaning, RF/microwave, electronic test, and photonics applications. This product is listed to help technical buyers, procurement teams, engineers, installers, and service organizations source practical equipment for demanding professional environments.

When available, buyers should review the provided specifications, compatibility details, condition notes, and accessories before purchase to confirm that the product meets their application requirements.