JDSU SB1C10231+17XF000SC 1x23 Single-Mode Fiber Optic Switch with SC/HPC Front Bulkheads

JDSU SB1C10231+17XF000SC 1x23 Single-Mode Fiber Optic Switch with SC/HPC Front Bulkheads

The JDSU SB1C10231+17XF000SC is a configurable SB Series fiber optic switch designed for automated optical signal routing in laboratory, production, telecom, and photonics test systems. The switch provides one optical input and 23 selectable output channels, allowing a single optical source or signal path to be routed to one of multiple connected devices, instruments, or test fixtures.

This specific configuration uses 9/125 µm single-mode fiber and supports wavelengths from 1270 nm to 1670 nm. The unit is configured with standard return-loss performance, SC/HPC optical connectors, and bulkheads on the front panel for both the input and output ports.

The 1x23 architecture is useful in systems where one optical signal must be distributed sequentially among multiple test paths. Automated switching can reduce repeated cable changes, protect optical interfaces from unnecessary handling, and improve consistency during component characterization, production screening, system verification, and multi-channel measurement procedures.

Features and Benefits of the JDSU SB1C10231+17XF000SC

The JDSU SB1C10231+17XF000SC provides practical optical path selection for engineers, laboratories, production facilities, and service organizations working with single-mode fiber optic systems.

• 1x23 optical switch configuration: Routes one optical input to one of 23 selectable output channels.
• Single-mode fiber design: Uses 9/125 µm fiber for compatible telecom and photonics applications.
• Broad wavelength range: Supports optical signals from 1270 nm to 1670 nm.
• SC/HPC optical connectors: Provides straight-contact SC interfaces for compatible single-mode patch cords.
• Front-panel input bulkhead: Places the optical input on the front panel for convenient access.
• Front-panel output bulkheads: Provides direct access to all 23 output channels from the front of the instrument.
• Standard return-loss configuration: Uses the standard SB Series return-loss option identified by code X.
• No external pigtails: The bulkhead configuration does not require an external pigtail cable-length option.
• Automated optical routing: Supports repeatable path selection in multi-device and multi-channel test systems.
• Reduced connector handling: Helps minimize repeated manual reconnection of optical patch cords during testing.

1x23 Optical Signal Routing

The JDSU SB1C10231+17XF000SC provides one input channel in the SB Series C configuration and 23 output channels. The switch connects the input signal to one selected output at a time, allowing users to direct an optical source toward the required device, measurement path, or production fixture.

This arrangement can be used to share a laser source among multiple devices under test or to select one of several output paths for evaluation by downstream measurement equipment. The exact switching sequence and system-control method depend on the complete SB Series configuration and supporting control equipment.

A 1x23 switch can be especially useful in production environments where many similar devices must be tested with a common optical source. It can also support laboratory systems containing multiple optical components, receiver paths, power sensors, or reference channels.

Single-Mode 1270 nm to 1670 nm Operation

The switch uses 9/125 µm single-mode fiber and is configured for wavelengths from 1270 nm to 1670 nm. This broad operating range supports common single-mode telecom and photonics wavelengths, including applications near 1310 nm, 1490 nm, 1550 nm, 1625 nm, and other wavelengths within the supported range.

The fiber type, wavelength range, connector polish, and patch-cord configuration should be matched throughout the optical system. Using incompatible fibers or connector types can increase insertion loss, reduce return loss, and affect measurement repeatability.

The actual performance of a complete test system also depends on the optical source, patch cords, mating adapters, connected instruments, connector cleanliness, fiber routing, and condition of the internal switch paths.

Front-Panel SC/HPC Bulkheads

The SB1C10231+17XF000SC is configured with front-panel bulkheads for both the input and output ports. This layout provides convenient access to the optical input and all 23 output channels without requiring rear-panel fiber routing or fixed external pigtails.

The SC/HPC connector configuration uses straight-contact SC interfaces. Compatible SC/PC or SC/HPC single-mode patch cords should be selected according to the connector keying and polish requirements of the system.

SC/HPC interfaces should not be mated directly with SC/APC connectors. Straight-contact and angled-contact connectors use different ferrule geometries, and direct mating can damage the interfaces or produce poor optical performance.

Typical Applications

The JDSU SB1C10231+17XF000SC Fiber Optic Switch is suitable for professional applications such as:

• Automated single-mode optical signal routing
• Multi-device optical component testing
• Production-line fiber optic testing
• Optical source distribution
• Receiver and detector selection
• Telecom equipment evaluation
• Fiber optic system verification
• Optical power and loss measurement systems
• Laboratory research and development
• Photonics component characterization
• Service and troubleshooting systems
• Automated optical test equipment integration

Product Overview

Brand	JDSU / JDS Uniphase
Model	SB1C10231+17XF000SC
Product Family	SB Series Fiber Optic Switches
Product Category	Single-Mode Fiber Optic Switch
Switch Configuration	1x23
Number of Input Channels	One
Number of Output Channels	23
Fiber Type	9/125 µm single-mode fiber
Wavelength Range	1270 nm to 1670 nm
Connector Type	SC/HPC
Primary Application	Routing one single-mode optical input to one of 23 selectable outputs

 

Configuration Details

Configuration Field	Selected Configuration
Number of Input Channels	One input channel, C configuration
Input Port Type	Bulkhead on front
Number of Output Channels	23
Output Port Type	Bulkheads on front
Fiber Type Code	7
Fiber Type	9/125 µm
Return-Loss Code	X
Return-Loss Configuration	Standard
Wavelength Code	F
Wavelength Range	1270 nm to 1670 nm
Cable-Length Code	000
Cable-Length Requirement	Not applicable for the bulkhead configuration
Connector Code	SC
Connector Type	SC/HPC

 

System Integration

The JDSU SB1C10231+17XF000SC is intended for integration into a professional optical test or routing system. Depending on the complete switch configuration, channel selection may be coordinated with optical sources, power meters, attenuators, spectrum analyzers, receivers, or automated production equipment.

In an automated system, the switch can reduce the number of optical sources or detectors required by allowing one instrument to serve multiple paths. Test software can select the required output before initiating a measurement on the connected device.

The required control interface, command set, external cables, and system software should be confirmed from the individual unit and supporting equipment. These items should not be assumed from the optical configuration code alone.

Optical Connector Care

All SC/HPC connector end faces should be inspected and cleaned before connection. Dust, residue, scratches, or damaged ferrules can increase insertion loss, reduce return loss, and produce unstable measurements.

Protective caps should be installed on unused input and output ports. A 23-output switch contains many optical interfaces, so a consistent inspection and cleaning process is important for maintaining reliable channel-to-channel performance.

Patch cords should be routed with appropriate bend-radius control and strain relief. Excessive bending, pulling, or lateral force at the front-panel bulkheads can affect optical performance or damage the cable and switch interfaces.

Comprehensive Functional and Performance Testing

Formal metrology calibration may not be applicable to every fiber optic switch configuration. When calibration is technically applicable and supported, the JDSU SB1C10231+17XF000SC is calibrated or characterized before shipment. The process may include evaluation of optical path performance, channel repeatability, insertion loss, return loss, and switching operation.

Following successful calibration or characterization, the equipment may include a calibration label, calibration certificate, and related test data, depending on the switch configuration and selected service.

If formal calibration is unavailable or not applicable, the switch receives comprehensive functional and performance testing. This process may include verification of the input connection, all 23 output channels, channel selection, optical continuity, connector condition, supported control functions, and available optical performance.

This testing helps verify that the switch operates correctly and that its available functions have been evaluated before it is released for shipment. The exact test scope, optical data, documentation, and included service records should be confirmed before purchase when these items are required for laboratory, production, regulatory, or quality-management applications.

Buyer Considerations

The JDSU SB1C10231+17XF000SC is a configuration-specific fiber optic switch. Buyers should confirm that the 1x23 architecture, 9/125 µm single-mode fiber, 1270 nm to 1670 nm wavelength range, SC/HPC connectors, standard return-loss configuration, and front-panel bulkheads match the intended system.

Buyers should review the condition of the input and all 23 output interfaces, channel-selection operation, control connections, enclosure, cooling, power requirements, included cables, and available test results before purchase.

Only accessories specifically identified in the product listing should be considered included. SC/HPC patch cords, control cables, software, optical sources, power meters, attenuators, and other supporting test equipment may be required separately.

Why Buy from AssetRelay?

AssetRelay supplies professional equipment and product solutions for fiber optic, telecom, laboratory, production, inspection, cleaning, RF/microwave, electronic test, and photonics applications. The JDSU SB1C10231+17XF000SC is listed to help engineers, laboratory personnel, production facilities, procurement teams, and service organizations source multi-channel optical routing equipment for professional test systems.

Buyers should review the available product photographs, physical condition, channel configuration, optical connector condition, included accessories, test information, and system compatibility before purchase. Confirming these details helps ensure that the switch matches the intended fiber type, wavelength range, connector polish, number of channels, and automated test workflow.

Only accessories specifically identified in the product listing should be considered included. Optical patch cords, control interfaces, external controllers, software, sources, detectors, and automation equipment may be required separately.