JDSU HA9008-SCL2 HA9W 50/125 Multimode Optical Attenuator with SC Front Bulkheads

JDSU HA9008-SCL2 HA9W 50/125 Multimode Optical Attenuator with SC Front Bulkheads

The JDSU HA9008-SCL2 HA9W Optical Attenuator is a professional HA Series fiber optic attenuator configured for multimode optical test, laboratory, telecom, production, and photonics applications. This product description applies specifically to the HA9008-SCL2 configuration and uses only the configuration details identified for this device.

The HA9008-SCL2 configuration uses 50/125 multimode fiber, no built-in option, the HA9W wide wavelength range model covering 750 nm to 1700 nm, SC connector configuration, low backreflection, and front-panel bulkheads. These configuration details are important for buyers replacing an existing attenuator or matching a specific optical test setup where fiber type, wavelength range, connector style, port layout, and backreflection option must be correct.

Features and Benefits of the JDSU HA9008-SCL2 HA9W Optical Attenuator

The JDSU HA9008-SCL2 HA9W Optical Attenuator provides practical value for professional users who require a clearly defined multimode optical attenuation configuration for fiber optic measurement and test workflows.

• HA9W wide wavelength model: Uses the HA9W model configuration, identified for 750 nm to 1700 nm optical attenuation applications.
• 50/125 multimode fiber: Configured for 50/125 multimode fiber optic test and measurement environments.
• Front-panel bulkheads: Uses the bulkheads front panel port configuration for convenient direct front-panel fiber connections.
• SC connector configuration: Uses the SC connector code for the configured optical interface.
• No built-in option: This HA9008-SCL2 configuration does not include a built-in splitter, coupler, or 1:2 switch option.
• Low backreflection configuration: Uses the low backreflection code for the configured HA9W attenuator.
• Professional optical attenuation control: Suitable for controlling multimode optical signal levels in laboratory, production, telecom, and photonics test environments.

Advanced Features and Practical Applications

The JDSU HA9008-SCL2 is intended for optical test environments where controlled multimode attenuation is required across a broad wavelength range. Optical attenuators are commonly used to reduce optical signal power to defined test levels during receiver sensitivity testing, optical link simulation, calibration procedures, system verification, and optical component characterization.

The HA9W model supports the 750 nm to 1700 nm wavelength range, making this configuration suitable for a wide range of multimode fiber optic test applications. The 50/125 fiber configuration supports common multimode workflows, while the SC connector configuration provides a defined connector interface for compatible patch cables, optical sources, meters, receivers, and test equipment.

The front-panel bulkhead configuration is practical for bench-top, rack-based, and laboratory optical test systems where direct access to the optical ports is useful. This front-panel layout can help simplify patching, troubleshooting, receiver testing, component characterization, and general optical power adjustment during everyday test workflows.

Because HA Series optical attenuators can be configured in many different ways, this listing should be used only for HA9008-SCL2. Other HA Series model numbers may use different wavelength ranges, fiber types, built-in options, connectors, backreflection settings, or port layouts. Matching the exact configuration is important for maintaining compatibility with existing test procedures and optical setups.

Typical Applications

The JDSU HA9008-SCL2 HA9W Optical Attenuator is suitable for professional applications such as:

• Multimode fiber optic attenuation control
• 50/125 multimode optical test setups
• Telecom optical network testing
• Optical receiver sensitivity testing
• Laboratory optical power adjustment
• Photonics component characterization
• Optical link simulation
• Production and engineering test workflows
• Service, repair, and replacement equipment requirements

Product Overview

Brand	JDSU / JDS Fitel
Model	HA9008-SCL2
Base Series	HA9
Model Range Code	8
Product Category	Multimode Optical Attenuator
Primary Application	Controlled optical attenuation for multimode fiber optic test systems
Suitable For	Fiber optic laboratories, telecom test environments, photonics systems, optical component testing, and production test workflows

 

HA9008-SCL2 Configuration Details

Configuration Field	HA9008-SCL2 Setting
Product Family	HA Optical Attenuator
Fiber Type Code	0
Fiber Type	50/125 multimode fiber
Built-In Option Code	0
Built-In Option	None
Model Code	8
Model Range	750 nm to 1700 nm
Connector Type Code	SC
Connector Type	SC
Backreflection Code	L
Backreflection Option	Low backreflection
Port Type Code	2
Port Type	Bulkheads front panel

 

HA9W 50/125 Multimode Specifications

Note: Optical specifications are measured at 23 °C with a laser source and do not include connectors, switch, or coupler if installed.

Specification	HA9008-SCL2 Details
Wavelength Range	750 nm to 1700 nm
Attenuation Range	100 dB from 750 nm to 1500 nm; 60 dB from 1500 nm to 1700 nm
Insertion Loss, 50/125 Multimode	=3.2 dB, NA = 0.2
Attenuation Accuracy, 750 nm to 1500 nm	±0.15 dB or ±0.015 dB/dB, whichever is greater
Attenuation Accuracy, Entire Range	±0.15 dB or ±0.015 dB/dB, whichever is greater
Attenuation Repeatability	±0.015 dB at constant temperature and wavelength
Backreflection, Low Option, 50/125 Multimode	Less than -40 dB, excluding connectors
Maximum Optical Input Power	200 mW for 50/125 multimode fiber
Recalibration Period	Not required
Attenuation Change Rate	=2.5 seconds, 0 dB to 100 dB
ON/OFF Switch Attenuation	Greater than 110 dB
ON/OFF Switch Speed	Less than 20 ms

 

Environmental and Mechanical Specifications

Specification	Details
Operational Temperature Range	0 °C to 40 °C
Storage Temperature Range	-40 °C to +60 °C
Humidity Range	95% up to 40 °C, decreasing at 5% per °C from 40 °C to 60 °C
Dimensions	35.5 cm x 21.2 cm x 8.9 cm
Weight	3.75 kg

 

Optical Attenuator Applications

The JDSU HA9008-SCL2 HA9W Optical Attenuator can be used in professional multimode optical test environments where controlled signal attenuation is required across a wide wavelength range. This type of attenuator is commonly used to set optical power levels, simulate fiber link loss, support receiver sensitivity testing, and help characterize optical components under repeatable test conditions.

With its 50/125 multimode fiber configuration, 750 nm to 1700 nm wavelength range, SC connector configuration, low backreflection option, and front-panel bulkhead layout, this configuration is intended for users who need the exact HA9008-SCL2 setup. The front bulkhead arrangement can be useful in bench-top or rack-based systems where direct access to the optical ports is preferred.

Compatibility and Configuration Notes

The HA9008-SCL2 part number should be reviewed carefully before purchase because each section of the model number identifies a specific configuration. For this unit, the configuration is 50/125 multimode fiber, no built-in option, 750 nm to 1700 nm model range, SC connector type, low backreflection, and front-panel bulkheads. These attributes should be matched against the buyer’s existing patch cords, optical source, receiver, power meter, and test procedure requirements.

Connector compatibility is especially important for optical attenuators. The SC connector type should be used only with compatible SC patch cables and mating interfaces. Users should follow proper fiber cleaning and inspection practices before connection to help protect optical interfaces and maintain repeatable measurement performance.

Buyer Considerations

The JDSU HA9008-SCL2 is a configuration-specific optical attenuator. Buyers should confirm that the HA9W 750 nm to 1700 nm model range, 50/125 multimode fiber type, SC connector configuration, low backreflection option, and front-panel bulkhead port layout match the intended optical test setup before purchase.

This description applies only to the HA9008-SCL2 configuration. It should not be used for other HA Series attenuators with different model numbers, fiber types, wavelength ranges, connector types, port arrangements, backreflection options, or built-in options.

Why Buy from AssetRelay?

AssetRelay supplies professional equipment and product solutions for fiber optic, telecom, laboratory, production, inspection, cleaning, RF/microwave, electronic test, and photonics applications. This product is listed to help technical buyers, procurement teams, engineers, installers, and service organizations source practical equipment for demanding professional environments.

When available, buyers should review the provided specifications, compatibility details, condition notes, and accessories before purchase to confirm that the product meets their application requirements.